We're All Ears For Your Storage Ideas 2023

Workbenches & Drawer Cabinets

Ergonomic Workbenches

ESD Versions are on an extended lead time

Workbench TP ›› Height adjustable from 650 to 900mm (by allen key) ›› Can be also supplied as a line or angle extension ›› Steel frame in light grey RAL7035 Frames are epoxy powder coated steel in light grey RAL 7035. The worktops are either 25mm melamine-laminate or volume conductive melamine-laminate on particle board. ESD benches are earthed via a protective 1 mega-ohm resistor. Supplied knock down for self-assembly

Worktop D x W mm Model

ESD Model

Price

Price

£371.44 £406.17 £433.44 £464.12 £493.27 £530.04 £537.76 £584.04

£392.26 £476.85 £544.27 £632.13 £690.50 £818.14 £874.60 £1005.84

500 x 700 500 x 1000 700 x 1000 700 x 1200 700 x 1500 700 x 1800 900 x 1500 900 x 1800

TP507 TP510 TP710 TP712 TP715 TP718 TP915 TP918

TP507 ESD TP510 ESD TP710 ESD TP712 ESD TP715 ESD TP718 ESD TP915 ESD TP918 ESD

Workbench TP

Workbench with Shelf TPH ›› Construction as TP with upright profiles & a 310 mm deep laminate shelf ›› Upper shelf is height adjustable from 1080 to 1550mm

Worktop D x W mm Model

ESD Model

Price

Price

£739.02 £785.29 £870.61 £858.90 £916.92

£960.60 £1062.00 £1264.68 £1212.20 £1422.18

700 x 1200 700 x 1500 700 x 1800 900 x 1500 900 x 1800

TPH712 TPH715 TPH718 TPH915 TPH918

TPH712 ESD TPH715 ESD TPH718 ESD TPH915 ESD TPH918 ESD

Mobile Bench SAP ›› Construction as TP but with 100mm swivel castors, 2 braked ›› Height adjustable from 650 to 900mm ›› Lower shelf & push handles are optional extras

Workbench with shelf TPH

Worktop D x W mm Model

ESD Model

Price

Price

£437.17 £518.39 £607.43

£506.76 £675.54 £853.62

500 x 700 700 x 1000 700 x 1500

SAP507 SAP710 SAP715

SAP507 ESD SAP710 ESD SAP715 ESD

Lower Shelf

£88.57 £139.28

£202.68 £369.65

500 x 700 700 x 1000

AT507 AT710

AT507 ESD AT710 ESD

Push Handle

£100.28 £103.17

Push Handle for 500mm deep benches Push Handle for 700mm deep benches

PUSH50 PUSH70

ESD protected workbenches are for use in the electronics industry & comply with EN61340-5-1

Mobile Bench SAP with Push Handle

249